Network Connectivity52 Xerox ® WorkCentre® 3615 Black and White Multifunction PrinterSystem Administrator GuideLDAP ServerLightweight Directory Access Protocol (LDAP) is a protocol used to process queries and updates to anLDAP information directory, on an external server. LDAP can also be used for network authentication andauthorization. LDAP directories are heavily optimized for read performance. Use this page to define howthe printer retrieves user information from an LDAP directory.1. At your computer, open a Web browser, in the address field, type the IP address of the printer, thenpress Enter or Return.Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer onpage 12.2. Click Properties > Protocols > LDAP Server.3. Type the LDAP IP address or host name and port number.Notes:• The settings for the LDAP-SSL/TLS appear only if the optional Device Memory Data is installedand Device Memory Data encryption is enabled under Secure Settings.• Before you click the SSL link, save any changes on the LDAP Server page.4. To enable LDAP-SSL/TLS, click SSL.5. Configure the optional LDAP server information as needed.a. Type the root path of the search directory in the Search Directory Root field using Base DNformat. For example, DC=xerox, DC=net.b. If you select System, type the Login Name and Password used to access the server. Noneinstructs the printer to access the server without providing credentials.c. For Search Timeout, specify the type of timeout to use for the server. You can set the LDAPserver to limit the time or you can set the time limit manually in the seconds field.d. For Search Name Order, specify the method to search names.e. To enable the Network Address Book for the Scan to Email service, for Server Email AddressBook, select On.f. To enable the Network Address Book for the fax service, for Server Fax Address Book, select On.6. Click Save Changes.
