Scanning88 Xerox ® WorkCentre® 3615 Black and White Multifunction PrinterSystem Administrator GuideAdding a Folder as an Address Book Entry Using the Address Book Editor1. Ensure that Fax Scan Utilities are installed.2. Click Start > All Programs > Xerox Office Printing > WorkCentre 3615.3. In the left navigation pane, under Printer Address Book, click Server.4. For Name, enter the name of the shared file on your computer.5. For Server Type, select Computer (SMB).6. Click Computer Settings Wizard, then click Browse.7. Navigate to a shared folder on your computer.8. Click OK, then click Next.9. To give the printer access to the shared folder, enter a login name and password.10. Click Next, then click Finish.11. Click OK.The new entry appears in the Server pane.12. Click Save All.Setting Up Scanning to an FTP ServerBefore you set up scanning to an FTP Server, the server must have the proper software installed and beconfigured with shared folders for each user.1. At your computer, open a Web browser, in the address field, type the IP address of the printer, thenpress Enter or Return.Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printeron page 12.2. In CentreWare Internet Services, click Address Book.3. Under Network Scan (Comp./Serv.), click Computer/Server Address Book.4. Next to any empty field, click Add.5. Enter the name to display in the address book.6. For Network Type, select Server (FTP).7. For Host Address, type the IP address or DNS name for the server.8. For Port Number, enter the default port number, or select a number from the range provided.9. For Login Name, type a login name for the FTP server.10. Type and confirm the password for the FTP server.11. For Name of Shared Directory, type the name of the destination folder on the FTP server. Forexample, to save scanned files to a shared folder named scans, type scans.12. For Subdirectory path, type the path of the folder as needed. For example, to save scans to a foldercalled colorscans that is one level below the scans folder, type /colorscans.13. Click Save Changes. A new address book entry is created.
