Network Connectivity50 Xerox ® WorkCentre® 3615 Black and White Multifunction PrinterSystem Administrator Guideb. For Trap Destination Address, type an IP address. IPv4 address format is x.x.x.x, where xrepresents a decimal number from 0 through 255. Ensure that the value entered is a validaddress and does not start with 127 or a number from 224 through 254. IPv6 addresses containhexadecimal digits delimited by the colon (:) character, and can be up to 39 characters in length.c. For Port Number, type a number from 0 through 65535.d. To send notifications to specified addresses, for Notify, select the trap types.7. To enable authentication traps, for Authentication Error Trap, select Enabled.8. Click Save Changes.Configuring SNMPv3SNMPv3 is the current standard version of SNMP defined by the Internet Engineering Task Force (IETF).It provides three important security features:• Message integrity to ensure that a packet has not been tampered with in transit• Authentication to verify that the message is from a valid source• Encryption of packets to prevent unauthorized accessEditing SNMPv3 Properties1. At your computer, open a Web browser, in the address field, type the IP address of the printer, thenpress Enter or Return.Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer onpage 12.2. Click Properties > Protocols > Edit SNMPv3 Properties.3. To create the SNMP administrator account, for Account Enabled, select Enabled. An administratoraccount can provide more extensive access to the objects on the printer.4. For Authentication Password, type and retype the SNMP administrator account password. Theauthentication password is used when sending authenticated SNMPv3 messages.5. For Privacy Password, type and retype a password. The privacy password is used when sendingprivate, encrypted SNMPv3 messages.6. Under Print Drivers/Remote Client Account, for Account Enabled, select Enabled. Account Enabledcreates an account for bi-directional printer drivers and Xerox remote clients. When this feature isenabled, it allows applications using SNMPv3, such as such as Xerox printer drivers, to communicatewith the printer.7. Under Print Drivers/Remote Client Account, for Reset to default password, click Reset as needed.8. Click Save Changes.
