Network ConnectivityXerox ® WorkCentre® 3615 Black and White Multifunction Printer 35System Administrator GuideConnecting to a Wireless NetworkA wireless local area network (WLAN) provides the means to connect two or more devices in a LANwithout a physical connection. The printer can connect to a wireless LAN that includes a wireless routeror wireless access point. Before connecting the printer to a wireless network, the wireless router must beconfigured with a service set identifier (SSID), a passphrase, and security protocols.Notes:• Wireless networking is available only on printers with the optional Wireless Network Adapterinstalled.• Some features are available only if you install the optional Data Memory Drive.Resetting Wireless SettingsIf the printer was previously installed in a wireless network environment, it could retain setup andconfiguration information.To prevent the printer from trying to connect to the previous network, perform the following steps:1. At the printer control panel, press the Machine Status button.2. Touch the Tools tab.3. Touch Admin Setting > Network > Wi-Fi.4. Touch the Down arrow to navigate to the next screen.5. Touch Reset Wi-Fi > Reset > Yes, Reset.Connecting to a Wireless Network Using the Control Panel Wi-Fi SetupWizardBefore you begin, ensure that you have the wireless network Service Set Identifier (SSID), encryptiontype, and passphrase. For details, see Collecting Wireless Network Information for Connecting to aWireless Network Manually on page 36.To connect to a wireless network using the Wi-Fi Setup Wizard:1. At the printer control panel, press the Machine Status button.2. Touch the Tools tab.3. Touch Admin Setting > Network > Wi-Fi.4. Touch Wi-Fi Setup Wizard.5. Select the desired network.Note: If the wireless network does not appear in the list, see Connecting to a Wireless NetworkManually on page 37.6. Touch Next.
