Maintenance142 Xerox ® WorkCentre® 3615 Black and White Multifunction PrinterUser GuideAdjusting the FuserUse Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print issmearing or can be rubbed off the paper, increase the offset for the paper you are using. If the toner isblistered or mottled, decrease the offset for the paper you are using.To adjust the fuser:1. At the printer control panel, press the Machine Status button.2. Touch Tools, then touch Admin Settings.3. Touch Service Tools.4. Touch Adjust Fuser.5. Touch the paper for the adjustment, touch (-) or (+), then touch OK.Adjusting the DensityThe Density Adjustment feature controls how much toner is used to print. Adjust the density for lightertoner use for saving toner or heavier for making prints bolder. A positive adjustment makes the printsdarker, while a negative adjustment makes the prints lighter.You can also adjust it to compensate fordifferent paper types and thicknesses.To adjust the density:1. At the printer control panel, press the Machine Status button.2. Touch Tools, then touch Admin Settings.3. Touch Service Tools.4. Touch Adjust Density.5. Touch the desired density from Darken to Lighten, then press OK.Printing ChartsThe Charts feature prints different charts that you can use to help diagnose printing issues.To print a chart:1. At the printer control panel, press the Machine Status button.2. Touch Tools, then touch Admin Settings.3. Touch Service Tools.4. Touch Chart.
