Installation and SetupXerox ® WorkCentre® 3615 Black and White Multifunction Printer 35User GuideConnecting to a Computer Using USBTo use USB, you must have Windows XP SP1 and later, Windows Server 2003 and later, or Macintosh OSX version 10.5 and later.To connect the printer to the computer using a USB cable:1. Ensure that the printer is turned off.2. Connect the B end of a standard A/B USB 2.0 cable to the USB Port on the back of the printer.3. Attach the power cord and then plug in the printer and turn it on.4. Connect the A end of the USB cable to the USB Port on the computer.5. When the Windows Found New Hardware Wizard appears, cancel it.6. You are ready to install the print drivers. For details, see Installing the Software on page 42.Connecting to a Wired Network1. Ensure that the printer is turned off.2. Using an Ethernet cable, connect the printer to the network.3. Attach the power cord to the printer, plug the cord into an electrical outlet, then turn on the printer.4. Set or automatically discover the network IP address of the printer.For details, see the System Administrator Guide at www.xerox.com/office/WC3615docs.Finding the IP Address of the PrinterTo install the print drivers for a network-connected printer, you need the IP address of your printer. Youalso need the IP address to access the settings of your printer through CentreWare Internet Services. Youcan view the IP address of your printer from the Configuration Report or on the printer control panel.Note: After the printer has been on for two minutes, print the Configuration Report. The TCP/IPaddress appears in the Network section of the page. If the IP address listed on the page is 0.0.0.0,the printer needs more time to acquire an IP address from the DHCP server. Wait two minutes, thenprint the Configuration Report again.To print the Configuration Report:1. At the printer control panel, press the Machine Status button.2. Touch Information Pages.3. Touch Configuration, then touch Print.To view the IP address of the printer on the control panel:1. At the printer control panel, press the Machine Status button.2. Touch Tools > Admin Settings > Network > Ethernet > TCP/IP.3. Record the IP address from the display.4. To return to the Services Home menu, press the Services Home button.
