Control Panel MenusWorkCentre 6505 Color Laser Multifunction PrinterUser Guide161Default SettingsThe Default Settings menu allows you to set default behaviors for Copy, Scan, Fax, and Print from USBfunctions.The Default Settings menu contains the following submenus:• Copy Defaults on page 161• Scan Defaults on page 162• Fax Defaults on page 163• Print from USB Defaults on page 163Copy DefaultsUse this menu to set default copying behaviors. For details, see Changing the Default Settings onpage 107.Item DescriptionColor Specifies Black & White or Color copies.Paper Supply Specifies the paper tray that copies are printed from.M.F. Paper Size Specifies the size of the paper in the manual feed slot.M.F. Paper Type Specifies the type of the paper in the manual feed slot.Collated Turns collation on or off.Reduce/Enlarge Reduces or enlarges the copies.Document Size Specifies the size of the originalDocument Type Specifies the type of the original.Lighten/Darken Lightens or darkens copies.Sharpness Specifies the sharpness of the copies.Color Saturation Deepens or lightens the overall color levels of your copies.Auto Exposure Turns Auto Exposure on and off when copying. Auto Exposure suppresses the documentbackground of off-white colored paper. It also helps suppress show-through whencopying 2-sided thin paper.Auto Expo. Level Adjusts the Auto Exposure level.Color Balance Adjusts the color levels of your copies.2-Sided Specifies 2-sided copying options:• 1->1-Sided• Long Edge Binding• Short Edge Binding
