Installation and SetupWorkCentre 6505 Color Laser Multifunction PrinterUser Guide414. When the installer is done, click Finish.5. The Windows Found New Hardware Wizard appears again. This time, select Yes, this time only,then click Next.6. Select Install the software automatically, then click Next.7. The wizard searches for your printer and lists the associated .inf files. Select the .inf file thatcorresponds to your Windows operating system:• Vista - d:windows scan\x86vista\xrsmnim.inf• XP, Windows Server 2003 - d:windows scan\x86\xrsmnim.inf• Vista 64 bit - d:windows scan\x64vista\xrsmnim.inf• XP 64 bit - d:windows scan\x64\xrsmnim.inf8. Select Next.9. The installer runs and completes the installation.You can now print and scan. For information about printing see Printing on page 55. For informationabout scanning see Scanning on page 111.Installing the Drivers and Utilities for Macintosh OS X Version 10.5 andLaterTo access all features of the printer, you must:• Install the print driver• Install the scan driver• Add the printerNote: Before installing drivers, verify that the printer is plugged in, turned on, and connected byUSB or to an active network. Make sure that the printer is receiving network information bymonitoring the LEDs on the back of the printer near the Ethernet cable jack (RJ45). When theprinter is connected to a functioning network and receiving traffic, the link LED is green, and itsamber traffic LED is flashing rapidly.Installing the Print DriverThe installation process for Macintosh OS X is the same for versions 10.5 and later.To install the print driver from the Software and Documentation disc:1. Insert the Software and Documentation disc into the appropriate drive on your computer.Note: If the Software and Documentation disc is not available, download the latest drivers fromwww.xerox.com/office/6505MFPdrivers.2. On your desktop, double-click the WorkCentre 6505 icon.3. Double-click WorkCentre 6505 Installer.4. At the Introduction installer window, click Continue.5. Acknowledge the warning notice, then click Continue.6. Read the license agreement, click Continue, then click Agree.7. Click Install.
