TroubleshootingWorkCentre 6505 Color Laser Multifunction PrinterUser Guide199Color RegistrationThis section includes:• Setting Automatic Color Registration on page 199• Performing a One-time Automatic Color Registration Adjustment on page 199• Performing a Manual Color Registration Adjustment on page 199The printer automatically adjusts the color registration when automatic adjustment is enabled. Youcan manually adjust color registration at any time the printer is idle. Adjust the color registration anytime the printer is moved. If you are having printing problems, adjust the color registration. For details,see Print-Quality Problems on page 191.Setting Automatic Color RegistrationTo set the automatic color registration adjustment feature:1. On the control panel, press the System button.2. Press the Up Arrow or Down Arrow button to select Admin Menu, then press the OK button.3. Press the Up Arrow or Down Arrow button to select Maintenance, then press OK.4. Press the Up Arrow or Down Arrow button to select Auto Regi Adjust, then press OK.5. Press the Up Arrow or Down Arrow button to select On, then press OK.6. Press the Return button to return to the Ready screen.Performing a One-time Automatic Color Registration AdjustmentUse the following procedure to perform an automatic color registration adjustment.Note: An automatic color registration adjustment is performed every time a new toner cartridge isinstalled.1. On the control panel, press the System button.2. Press the Up Arrow or Down Arrow button to select Admin Menu, then press the OK button.3. Press the Up Arrow or Down Arrow button to select Maintenance, then press OK.4. Press the Up Arrow or Down Arrow button to select Adjust ColorRegi, then press OK.5. At Auto Adjust, press OK.6. At the Are you sure? prompt, press the Up Arrow or Down Arrow button to select Yes.7. Press OK to begin the calibration.Performing a Manual Color Registration AdjustmentYou can fine-tune color registration by performing a manual adjustment. Manual color registrationadjustment is a three-part process:• Printing the Color Registration Correction Chart on page 200.• Determining the Color Registration Values on page 200.• Entering Color Registration Values on page 201.
