PrintingWorkCentre 6505 Color Laser Multifunction PrinterUser Guide92Automatic 2-Sided PrintingYou can perform automatic 2-sided printing from Tray 1 and, if installed, the 250-sheet feeder (Tray 2).To perform automatic 2-sided printing:1. Insert the paper into the desired tray. For more information, see Loading Paper on page 61.2. In the print driver, select 2-sided printing:• Windows: On the Paper/Output tab, from the 2-Sided Print drop-down list, select Flip on longedge or Flip on short edge.• Macintosh: In the Print dialog box, from the Presets menu, select Layout. Then select Long-edged printing or Short-edged printing.For details, see Binding Edge Options on page 91.3. Select any other desired printing options, then click OK.4. Click OK or Print to start printing.Note: For optional printer features, such as 2-sided printing, to be available in the print driverdialog boxes, the optional features must be installed and enabled. If you have not enabled yourinstalled optional features, see Enabling Optional Features on page 46.See also:Automatic 2-Sided Printing Guidelines on page 91Manual 2-Sided PrintingThis section includes:• Performing Manual 2-sided Printing from Tray 1 on page 93• Performing Manual 2-sided Printing from the Manual Feed Slot on page 93If you do not have the optional duplex unit installed, you can still print on both sides of some paper.You can also use this technique for printing on paper incompatible with the duplex unit.CAUTION: Use only paper specified for use with this printer. Damage caused by unsupportedpaper is not covered under the Xerox ® Warranty, Service Agreement, or Total SatisfactionGuarantee. The Total Satisfaction Guarantee is available in the United States and Canada.Coverage can vary outside these areas. Please contact your local representative for details.
