PrintingWorkCentre 6505 Color Laser Multifunction PrinterUser Guide634. Insert all paper face up, with the top edge at the front of the paper tray.Notes:• Do not force the paper into the tray.• Be careful not to bend the paper.5. Slide the paper width guides until they rest lightly against the edge of the paper stack.6. Insert the tray back into the printer until it stops.CAUTION: Be careful not to use excessive force on the tray. Doing so could damage the printer.See also:Setting Paper Types and Sizes on page 68Loading Paper in the Manual Feed SlotUse the manual feed slot for a wide range of media including:• Plain Paper• Letterhead• Lightweight Cardstock• Heavyweight Cardstock• Lightweight Glossy Cardstock (Coated 2 and Coated 3)• Heavyweight Glossy Cardstock• Colored Paper• Labels• Envelopes• SpecialFor a more complete list of paper types and sizes usable in the Manual Feed Slot, see Supported Paperon page 58.Follow these guidelines to avoid problems during printing:• Use several sheets of the paper only when adjusting the paper width guides.• Holding the paper on both sides, slowly and evenly insert the paper into the printer.• If the paper looks skewed after the printer pulls it in, gently remove the paper and reseat it. Thenpress the OK button or wait for the automatic calibration to start.wc6505_010
