Installation and SetupWorkCentre 6505 Color Laser Multifunction PrinterUser Guide28Installation and Setup OverviewBefore using the printer, you must:1. Make sure that the printer is set up correctly in an appropriate location. For details, see Selecting aLocation for the Printer on page 29.2. Select a connection method. For details, see Choosing a Connection Method on page 30.3. Make sure that the printer is connected correctly. For details, see Connecting the Printer onpage 30.4. Turn on the printer and the computer. The Startup Page prints by default. If it does not, seeStartup Page on page 24. If you are connected to a network, keep the Startup Page for referencingnetwork settings such as the IP address of your printer.5. If connected to a network, configure network settings. For details, see Configuring NetworkSettings on page 32.6. Install drivers and software utilities from the Software and Documentation disc. The softwareinstallation procedure depends on your connection type (network or USB). For details, seeInstalling the Software on page 38.7. Enable optional features and configure software.Note: If the Software and Documentation disc is not available, you can download the latestdrivers from www.xerox.com/office/WC6505drivers.
