Administrator ToolsXerox ® WorkCentre® 6655 Color Multifunction Printer 255System Administrator GuideManually Updating the Software Using a USB Flash Drive1. On your USB Flash Drive, create a directory and name it UPGRADE, then copy the .dlm file into thisdirectory.Note: You can have only one .dlm file in the UPGRADE directory.2. To turn off the printer, press the Power button.3. Insert your USB Flash drive into the USB port on the side of the printer.4. To begin the software upgrade, restart the printer.5. When prompted, remove the flash drive.6. To restart the printer, press 0.Configuring Automatic UpdatesYou can configure the printer to connect routinely to an FTP directory on your network to update printersoftware automatically. First, manually download the latest software file and copy it to the location onthe FTP server. The printer retains all configured network settings and installed options after thesoftware upgrade processes.1. In CentreWare Internet Services, click Properties>General Setup>Software Upgrade.2. If the feature is not displayed, click Allow Upgrade.3. Click the Auto tab.4. Under Auto Upgrade, select Enabled.5. Under Refresh Start Time, select Hourly or Daily.If you select Daily, type the time in hours and minutes.6. Under Protocol, select the address type. Options include IPv4, IPv6, or Host Name.7. In the address field, type the appropriately formatted address and port number of the server wherethe upgrade software is located. The default port number is 21.8. In the Directory Path field, type the full path to the software upgrade file located on the server in.dlm format.9. Type the Login Name that the printer uses to access the server.10. Type the password, then type the password again to verify.11. To update an existing password, select Select to save new password.12. Click Apply.Note: Software installation begins several minutes after the software is submitted to the printer.Once installation begins, CentreWare Internet Services is disabled. You can monitor the installationprogress from the printer control panel.
