SecurityXerox ® WorkCentre® 6655 Color Multifunction Printer 75System Administrator GuideConfiguring Authentication Server Settings for SMB1. On the Login Methods page, next to Authentication Servers, click Edit.2. Under Authentication Type, select SMB (Windows NT 4) or SMB (Windows 2000/2003).3. Click Add New.4. Under Domain, type the domain name of your authentication server.5. Select the address type.6. Type the appropriately formatted address and port number.7. Click Save.8. To specify server settings for an alternate authentication server, click Add New.9. To copy the settings from another server, select a server from the list and click Copy From.10. Click Edit to update the settings.Configuring Authentication Server Settings for LDAPThe printer uses the primary LDAP server for authentication, authorization, and personalization. Theprimary LDAP server is the server that appears at the top of the LDAP server list on the LDAP Serverpage in CentreWare Internet Services. If you already have configured LDAP server settings, theprinter uses this server automatically when you select LDAP as the network authentication orauthorization method. The printer only uses alternate LDAP servers for authorization andpersonalization when primary LDAP server communication fails.1. On the Login Methods page, next to Authentication Servers, click Edit.2. Under Authentication Type, select LDAP.3. Click Add New.4. Configure LDAP server settings, then click Apply.Configuring Xerox Secure Access Unified ID System Authentication SettingsWhen Xerox ® Secure Access authentication is configured, users swipe a pre-programmed identificationcard at the control panel. The printer compares the user credentials to the information stored on theXerox ® Secure Access server. To use Xerox ® Secure Access, purchase and install the Xerox Secure AccessUnified ID System.To configure access rights using Xerox Secure Access Unified ID System authentication:• Install the Xerox ® Secure Access authentication server software and configure it with user accounts.For details, see the Xerox Secure Access Unified ID System documentation.• Enable the Authentication and Accounting Configuration Web service. For details, see HTTP onpage 60.• Format and configure identification cards.• Connect your card reader to the USB Port.• Set the login method to Xerox Secure Access - Unified ID System For details, see Setting the LoginMethod on page 71.• Configure Xerox ® Secure Access Setup settings.• Enable the Xerox ® Secure Access Web service. For details, see HTTP on page 60.