Printing BookletsWorkCentre 7425/7428/7435User Guide71Printing BookletsWith 2-Sided printing, you can print a document in the form of a small book. Create booklets for anypaper size that is supported for automatic 2-Sided printing. The driver automatically reduces eachpage image and prints four pages per sheet of paper (two on each side). The pages are printed in thecorrect order so that you can fold and staple the pages to create a booklet.When you print booklets, you can also specify the creep and gutter in supported drivers.• Creep: Specifies how much the page images are shifted outward (in 10ths of a point). Thiscompensates for the thickness of the folded paper, which otherwise would cause the page imagesto shift slightly outward when folded. You can select a value from zero to 1.0 points.• Gutter: Specifies the horizontal distance (in points) between the page images. A point is 0.35 mm(1/72 in.).The following additional booklet printing options are available in some drivers:• Draw Page Borders: Prints a border around each page.• Target Paper Size: Specifies the size of the paper for the booklet.• Right to Left: Reverses the order of the pages in the booklet.To select booklet printing in a supported driver:Windows 2000 or later and PostScript driver1. Click the Layout/Watermark tab.2. Click Booklet Layout.If you are using the PostScript driver, click the Booklet Options button to specify the creepand gutter.3. If desired, click Draw Page Borders in the drop-down list.Creep Gutter
