Copying− To reduce or enlarge proportionally, touch Reduce/Enlarge, then touch Proportional %.• To reduce or enlarge the percentage incrementally, touch Plus (+) or Minus (-).• To reduce or enlarge the percentage using the alphanumeric keypad, touch the currentdisplayed value.• Presets (X-Y%) allow you to select from a list of preset values. Touch More for additionalpreset values.• To center the image on the page, select the Auto Center check box.− To reduce or enlarge the width and length of the image by different percentages, touchReduce/Enlarge, then touch Independent %.• Width:X% allows you to reduce or enlarge the width of the image incrementally using thealphanumeric keypad or the Plus (+) and Minus (-) buttons.• Length:Y% allows you to reduce or enlarge the length of the image incrementally using thealphanumeric keypad or the Plus (+) and Minus (-) buttons.• Presets (Y/X) allow you to select from a list of preset values. Touch More for additionalpreset values.• To center the image on the page, select the Auto Center check box.3. Touch OK.Selecting the Paper TraySelect a paper tray loaded with the desired paper to make copies on letterhead, colored paper,transparencies, or different paper sizes.To select the tray to use for copies:1. Press the Services Home button, then touch Copy.2. Under Paper Supply, touch the desired tray.3. If the desired tray is not listed, select another tray:a. Touch More for additional options.b. Touch the desired tray.4. Touch OK.Selecting 2-Sided Copy OptionsUse the document feeder or the document glass to copy one or both sides of a 2-sided original.To select 2-sided copy options:1. Press the Services Home button, then touch Copy.2. Under 2-Sided Copying, select one of the following:− 1->1 Sided scans only one side of the originals and produces 1-sided copies.− 1->2 Sided scans only one side of the originals and produces 2-sided copies. To rotate thesecond sides, touch Rotate Side 2.110 Xerox ® WorkCentre® 7970 Multifunction PrinterUser Guide
