YASKAWA MP3300 series Product Manual

Also see for MP3300 series: Instruction manual Setup manual

Contents

3.2 Function Modules3.2.10 Maintenance Monitoring3-1013 CPU Module Functionality Error CodesIf reading the monitor data cannot be completed normally, one of the following error codes isdisplayed in the system registers that normally contain the circuit number and axis number. Monitoring MethodsYou can use the following methods to monitor the data stored in the system registers.• Ladder ProgrammingRefer to the following manual for operating details.MPE720 Version 7 User’s Manual (Manual No.: SIEP C880761 03)• TracingRefer to the following manual for operating details.MPE720 Version 7 User’s Manual (Manual No.: SIEP C880761 03)• Data LoggingRefer to the following section for operating details.3.2.5 Data Logging on page 3-66SW + 48Axis 12Circuit numberSame as above.SW + 49 Axis numberSL + 50 Monitor valueSW + 52Axis 13Circuit numberSame as above.SW + 53 Axis numberSL + 54 Monitor valueSW + 56Axis 14Circuit numberSame as above.SW + 57 Axis numberSL + 58 Monitor valueSW + 60Axis 15Circuit numberSame as above.SW + 61 Axis numberSL + 62 Monitor valueSW + 64Axis 16Circuit numberSame as above.SW + 65 Axis numberSL + 66 Monitor valueSystem Registers ErrorCircuit Number Axis Number80 hex 18 hex Relay error: An error occurred in message communications with theSERVOPACK.80 hex 22 hex Timeout error: A response was not received from the SERVOPACKwithin 5 seconds.You can also use a touch panel to monitor the stored data.Continued from previous page.System Register Item RemarksInformation