YASKAWA MP3300 series Product Manual

Also see for MP3300 series: Instruction manual Setup manual

Contents

1.3 Devices and Components That Are Required to Build a System1.3.1 MP3300 Module/Unit List1-71 Introduction1.3.1 MP3300 Module/Unit ListThe following table lists the MP3300 Modules and Units.* Refer to the following section for details.3.2.3 Motion Control Function Modules (SVC, SVC32, SVR, and SVR32) on page 3-47I/O Modules with MECHATROLINK-IIICommunications64-point I/OModuleUsed to input or output digi-tal, analog, or pulse trainsignals.JEPMC-MTD2310-E 24 VDC, 64 inputs, 64 outputsAnalog InputModuleJEPMC-MTA2900-E 8 analog input channelsAnalog Out-put ModuleJEPMC-MTA2910-E 4 analog output channelsPulse TrainInput ModuleJEPMC-MTP2900-E 2 pulse-train inputsPulse TrainOutput Mod-uleJEPMC-MTP2910-E 4 pulse-train outputsMPE720 IntegratedEngineering Tool Version7Used to adjust, maintain,and program AC ServoDrives and Inverters that areconnected to the network.CPMC-MPE780D −Expansion InterfaceModule CablesUsed to use an ExpansionInterface Module to connectthe Main Rack to an Expan-sion Rack or to connect twoExpansion Racks.JEPMC-W2094-A5-E Length: 0.5 mJEPMC-W2094-01-E Length: 1.0 mJEPMC-W2094-2A5-E Length: 2.5 m− Panel-mounting Bracket Used to mount the MP3300inside a control panel.JEPMC-OP2300S-E −Continued from previous page.No. Name Use Model Remarks1112Type Abbreviation Model DescriptionCPU Module for 16 axes CPU-301 (16 axes) JAPMC-CP3301-1-E −CPU-302 (16 axes) JAPMC-CP3302-1-E −Motion ControlFunction ModulesSVC − MECHATROLINK-IIISVR − Virtual axes*CommunicationsFunction Module 218IFD − EthernetCPU Module for for 32 axes CPU-301 (32 axes) JAPMC-CP3301-2-E −CPU-302 (32 axes) JAPMC-CP3302-2-E −Motion ControlFunction ModuleSVC32 − MECHATROLINK-IIISVR32 − Virtual axes*CommunicationsFunction Module 218IFD − EthernetBase Unit MBU-303 JEPMC-BU3303-E 3 slotsMBU-304 JEPMC-BU3304-E 1 slot