YASKAWA MP3300 series Product Manual

Also see for MP3300 series: Instruction manual Setup manual

Contents

3.2 Function Modules3.2.4 The M-EXECUTOR3-573 CPU Module FunctionalityM-EXECUTOR Detail SettingsThe detailed settings for the M-EXECUTOR are performed on the Module Configuration TabPage and the Detail Definition Dialog Box.This section provides the procedures to display this tab page and dialog box, and describes their contents. Module Configuration Definition Tab PageUse the following procedure to display the Module Configuration Definition Tab Page.• Click the Module Configuration Icon on the Start Tab Page.The following table describes the M-EXECUTOR items that are displayed on the Module Con-figuration Definition Tab Page.No. Item Display/Setting Item Editing Function Module/SlaveDisplays whether the M-EXECUTOR is enabled.• UNDEFINED: Disabled• M-EXECUTOR: EnabledPossible Status Displays the status of the M-EXECUTOR. Possible Circuit No./Axis AddressStart Not used.“----” is always displayed. Not possibleOccupiedcircuits Motion Register Not used.“----” is always displayed. Not possibleRegister(Input/Output)Disabled Not used.“----” is always displayed. Not possible Start- EndDisplays the range of registers that is used as the I/O area.• Setting range: 00000 to 07FFF hex or 10000 to 17FFF hexRefer to the following section for details. Details on the I/O Registers on page 3-58Possible SizeThe size of the I/O area is displayed in words.• Setting range: 64 to 128Four words each of input registers and output registers arerequired to register a single motion program or sequence pro-gram in the M-EXECUTOR. If you need to register more than16 programs, set the size with four additional words for eachprogram to add. A maximum of 32 programs can be regis-tered (maximum number of program definitions).Possible Scan Not used.“----” is always displayed. Not possible Comment Display the user comment.Enter a comment of up to 16 characters. PossibleCells forM-EXEC-UTORsettings      