YASKAWA SI-EP3/V Installation Manual
Also see for SI-EP3/V: Technical manual
                                                                    | |
Contents |
6 Procedure AYASKAWA TOEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Installation Manual 2710. On IP20/NEMA Type 1 enclosure drives, the screw for the drive ground terminalalso acts as one of the screws that attaches the NEMA Type 1 conduit bracket tothe drive. Reattach the NEMA Type 1 conduit bracket according to Figure 16 andconnect the drive-side of the ground wire to the drive ground terminal.Figure 16Figure 16 Reattach the NEMA Type 1 Conduit Bracket and Connect the Ground Wire11. Reattach the IP20/NEMA Type 1 bottom terminal cover according to Figure 17.Proceed to STEP 13.Figure 17Figure 17 Reattach the Bottom Cover IP20/NEMA Type 1Ground terminalGround wireDrive ground terminal/located on NEMA Type 1conduit bracket screwGround wireDrive-sideground terminalring lug(size varies):M3.5 to M6Ring lug forOption groundFESize: M3IP20/NEMA Type 1 Enclosure |
Related manuals for YASKAWA SI-EP3/V
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine