YASKAWA SI-EP3/V Installation Manual
Also see for SI-EP3/V: Technical manual
                                                                    | |
Contents |
7 Procedure B40 YASKAWA TOEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Installation Manual14. Reattach the front cover of the drive using four bolts, Figure 38. Refer to Table 9 onpage 40 for tightening torque specifications.NOTICE: Damage to Equipment. Take proper precautions when wiring the option so that the front coverswill easily fit back onto the drive. Make sure no cables are pinched between the front covers and the drivewhen replacing the cover. Failure to comply may result in damage to circuitry and equipment.Figure 38Figure 38 Attach Cover to DriveTable 9 Front Cover Installation Bolt Size and Tightening Torque15. Set drive parameters in Table 10 for proper option performance.16. End of Procedure B.Voltage Class Model No. CIMR-V InstallationScrew SizeTightening TorqueNm(lb-in)Single Phase 200 V Class BA0001 to BA0012 M5 2.0 to 2.5 (17.7 to 22.1)Three Phase 200 V Class 2A0001 to 2A0020 M5 2.0 to 2.5 (17.7 to 22.1)2A0030 to 2A0069 M6 5.4 to 6.0 (47.8 to 53)Three Phase 400 V Class 4A0001 to 4A0011 M5 2.0 to 2.5 (17.7 to 22.1)4A0018 to 4A0038 M6 5.4 to 6.0 (47.8 to 53)Front coverFront cover screwDrive |
Related manuals for YASKAWA SI-EP3/V
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine