YASKAWA SI-EP3/V Installation Manual
Also see for SI-EP3/V: Technical manual
                                                                    | |
Contents |
9 Option Drive ParametersYASKAWA TOEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Installation Manual 45Table 11 Option MonitorsF7-33 to F7-37Option Firmware VersionVST800250Dynamic Input AssemblyParametersConfigurable inputs 1 to 5.If a value other than 0 is assigned to parameters F7-23to F7-27 and F7-33 to F7-37 by the drive, that valuewill take precedent over a value set by theconfiguration software. If the value in the drive is 0(default), the value from the configuration softwarewill be used. 0Option Firmware VersionVST800251Dynamic Input AssemblyParametersConfigurable outputs 1 to 5.If a value other than 0 is assigned in the configurationsoftware, those values will be used, otherwise, thevalues of the drive parameters set in parameters F7-23to F7-27 and F7-33 to F7-37 will be used.H5-11 Communications ENTERFunction SelectionSelect the function for the ENTER command thatsaves parameter data to the drive.0: Parameter changes are activated when ENTERcommand is written1: Parameter changes are activated immediatelywithout use of ENTER command1<1> To start and stop the drive with the option master device using serial communications, set b1-02 to 3. To controlthe drive frequency reference via the master device, set b1-01 to 3.<2> If F6-01 is set to 3, then the drive will continue to operate when a bUS error or an EF0 fault is detected. Takeproper safety measures, such as installing an emergency stop switch.<3> Drive software versions 1012 and later have F6-07 and F6-08 both set to 1.<4> Drive software versions 1014 and earlier have F7-14 default of 0.<5> Available in drive software versions PRG:1024 and later when combined with option firmware versionVST800251 and later. Not available in drive software versions PRG:508.<6> Available in option firmware version VST800251 and later.No. Name Description Value RangeU6-80 to U6-83 Online IP Address SI-EP3/V IP Address, U6-80 is the most significantoctet. 0 to 255U6-84 to U6-87 Online Subnet Subnet, U6-94 is the most significant octet. 0 to 255U6-88 to U6-91 Online Gateway Gateway, U6-88 is the most significant octet. 0 to 255U6-92 Online Speed Port 1 Link Speed 10, 100U6-93 Online Duplex Port 1 Duplex Setting 0: Half, 1: FullU6-94 Online Duplex Port 2 Link Speed 0: Half, 1: FullU6-95 Online Duplex Port 2 Duplex Setting 0: Half, 1: FullU6-98 First Fault First Option Board Fault -U6-99 Current Fault Current Option Board Fault -No. Name Description Default |
Related manuals for YASKAWA SI-EP3/V
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine