Yaesu FT1DR Instruction Manual

Also see for FT1DR: Operating manual Instruction manual Technical supplement Instruction manual Quick manual

Contents

25Receiving APRS ® beaconsDisplaying RAW packet dataDisplay packet data (raw data) received from the remote station on the STATION LISTdetails screen.1 Press F and then 0.The STATION LIST screen appears.2 Turn O to select a beacon station.Select the beacon station to see the RAW packet data received from it.3 Press H.The STATION LIST detail screen is displayed on the LCD.4 Press M.RAW packet data is displayed on the LCD.5 Press O to scroll the screen display.Tip After you have pressed F, you can change the beacon being displayed by turning O whilef is displayed on the LCD.6 Press B.STATION LIST detail screen appears.STATION LIST details screenDetails of the RAW Packet Data display screena Destination Information: Displays the destination address information of AX.25 packet.b Digipeater Information: Displays the information of repeater station (Digipeater).c RAW TEXT: Displays the text of raw dataTip• DIGI (First) and DIGI (Last) are not displayed because Digipeater information is not saved fortransmission message. (“–” is displayed instead)• When a 3rd Party Header Beacon (beacon from I-Gate, etc.) is received, the route informationincluded in the 3rd Party Header Beacon is displayed, not that obtained from the AX.25 packetsignal.