Yaesu FT1DR Instruction Manual

Also see for FT1DR: Operating manual Instruction manual Technical supplement Instruction manual Quick manual

Contents

50APRS Set mode function listExplanation:OFF: Turn APRS function [OFF].1200bps: Sets APRS baud rate to 1200bps.9600bps: Sets APRS baud rate to 9600bps. 5 APRS MSG FLASHSetting for strobe flash when there is an incoming message.Setting Item: MSG: OFF/2-4-10 (2sec interval) / 20sec / 30sec / 60sec /CONTINUOUS / EVERY 2s-10s (1sec interval) / EVERY10s-EVERY 50s (10sec interval) / EVERY 1m-EVERY 10m (1mininterval)GRP: OFF / 2-4-10 (2sec interval) / 20sec / 30sec / 60sec /CONTINUOUSBLN: OFF / 2-4-10 (2sec interval) / 20sec / 30sec / 60sec /CONTINUOUSDefault: MSG: 4sec. / GRP: 4sec. / BLN: 4secExplanation:The strobe (white LED) flashes depending on settings in each of the following: [MSG]when a message is received, [GRP] when a group message is received, [BLN] when abulletin message is received.Strobe (white LED) flashes continuously when COUNTINUOUS is selected.If EVERY is selected in [MSG], the strobe (white LED) flashes as below:2sec - 5sec 1 flash for the set time interval6sec - 9sec 2 flashes for the set time interval10sec - 50sec 3 flashes for the set time interval1min - 5min 4 flashes for the set time interval6min - 10min 5 flashes for the set time intervalThe strobe (white LED) will not flash if [OFF] is selected.If EVERY is selected for [MSG] and strobe (white LED) is flashing, and a GRP (group)or BLN (bulletin) message is received, the group or bulletin strobe will temporarily flash,then return to the message strobe once reception of the group or bulletin message iscomplete. 6 APRS MSG GROUPGroup filter setting for APRS MSG GROUP reception messagesSetting Items: A filter can be set for receiving messages with a specified group code(ALL or CQ).G1: ALLG2: CQG3: QSTG4: YAESUG5: