Yaesu FT1DR Instruction Manual

Also see for FT1DR: Operating manual Instruction manual Technical supplement Instruction manual Quick manual

Contents

42Transmitting an APRS® Message10 Press V.Fixed texts can be selected by repeating steps 9 to 10.Tip • Characters can be added or deleted from the selected fixed text. in addition, characters canbe added to the beginning and end a fixed text.• When F is pressed, a character is deleted and the cursor moves to left.• Pressing H moves the cursor to the right.• Characters can also be entered by turning O.• By selecting [CLR] by pressing A, then V, all characters to the right of the cursor can bedeleted.• By selecting [INSERT] by pressing A, then V, a single character can be inserted intothe text.• By selecting [CLRALL] by pressing A, then V, all characters can be deleted.• By selecting [DELETE] by pressing A, then V, all characters to the right of the cursorcan be deleted.11 Press H over 1 second.The message is sent and LCD returns to the APRS MESSAGE LIST screen.Using the Response FunctionStations that sent a APRS Messages can be responded to.1 Turn O to select the other station.Select the station to respond to on the APRS MESSAGE LIST screen.2 Press H.3 Press D.Enters the APRS Editing screen4 Enter characters.Enter characters to the response message by followingthe steps in [Individually Enter Characters] (See page 40)or [Create Messages using Fixed Texts] (See page 41)5 Press p.Message is sent to the station you are responding to. Registering fixed texts8 types of fixed text of up to 16 characters can be registered to this transceiver.1 Press M over 1 second.Enters the Set mode.2 Turn O to select [9 APRS].3 Press H.4 Turn O to select [7 APRS MSG TXT].5 Press H.6 Turn O to select the number to register the fixedmessage.