Yaesu FT1DR Instruction Manual

Also see for FT1DR: Operating manual Instruction manual Technical supplement Instruction manual Quick manual

Contents

33Transmitting the APRS® beacon8 Turn O to select the address.Select address (1 or 2).Only in P8, up to 8 addresses can be set.9 Press H.The cursor moves to the next item.Pressing F moves the cursor back to the previous item.10 Enter the CALLSIGN using keypad keys.Enter a CALLSIGN using keypad keys referring to the following table.Numeric key A, 0 (Alphanumeric)1 12 ABC23 DEF34 GHI45 JKL56 MNO67 PQRS78 TUV89 WXYZ90 0Tip • Pressing F deletes a character and moves the cursor to the left.• Pressing H moves the cursor to the right.11 Repeat steps 9 to 10 and enter characters (CALLSIGN), and enter SSID by turningO.Tip To enter the following addressRepeat steps 5 through 11 and enter the following ADDRESS.12 Press M to set the Digipeater Route.13 Press p.Exits from the Set mode.