Yaesu FT1DR Instruction Manual

Also see for FT1DR: Operating manual Instruction manual Technical supplement Instruction manual Quick manual

Contents

41Transmitting an APRS® Message11 Repeat steps 9 and 10 to enter characters.Up to 67 characters can be entered.Tip • When F is pressed, a character is deleted and the cursor moves to left.• Pressing H moves the cursor to the right.• Characters can also be entered by turning O.• By selecting [CLR] by pressing A, then V, all characters to the right of the cursor can bedeleted.• By selecting [INSERT] by pressing A, then V, 1 character can be inserted into the text.• By selecting [CLRALL] by pressing A, then V, all characters can be deleted.• By selecting [DELETE] by pressing A, then V, all characters to the right of the cursorcan be deleted.12 Press H over 1 second.The message is transmitted and LCD returns to the frequency display screen.TipData transmission time can be changed by setting the Set mode option [9 APRS] [12 APRS TXDELAY]. Create a message using fixed text1 Pressing F, then 0 twice in the frequency displayscreen opens the APRS MESSAGE LIST screen.2 Press D.Enters APRS MESSAGE Edit screen.If there are messages that were previously created oredited, these messages appear. To edit characters, pressF and individually delete each character.3 Use keypad keys to enter the destination CALLSIGN totransmit a message.4 Press H.The cursor moves to the next column.5 Repeat steps 3 and 4 to enter the CALLSIGN.Up to 6 characters can be entered for the callsign.6 Press H.The cursor moves to the 7 th character position.7 Turn O to enter SSID.Enter the SSID of 1 to 15.The SSID does not need to be entered if it is unnecessary.8 Press H.The cursor moves to the next character enter column.9 Press A to select for fixed texts (MSG TXT1 to MSG TXT8) already registered.