34APRS message screen and key operationDescription of APRS message screen and key operationPressing F, then 0 twice in the frequency display screen opens the APRSMESSAGE LIST screen.Pressing 0 toggles between the APRS STATION LIST screen and APRSMESSAGE LIST screen.On the APRS MESSAGE LIST screen, up to 60 sent and received messages can bestored to Memory, and displayed.The newest message appears at the top of the list.a Number: The number of received or transmitted message isdisplayed.b Reception/Transmission:An icon like the following is displayed during receptionor transmission. Received message (Unread) Received message (Read) Transmitted Message (ACK Received) Transmitted Message (ACK Not Received)4 to Transmitted Message (Transmission Incomplete)* This value represents the remaining number of transmissionsc Callsign: Transmitted and received CALLSIGNS are displayed.d Time or date: Time (HH Hours: MM Minute) or Date (MM Month/DD Day) that message wastransmitted or received is displayed.e Beacon Automatic/Manual Reception Icon:If icon does not appear, the beacon is manually transmitted.If icon appears, the beacon is automatically transmitted. If icon is displayed, thebeacon is automatically transmitted with SmartBeaconing.O… Scroll Screen1… Move cursor to the top of APRS MESSAGE LIST.V… Delete selected beacon station on the LCD (See page 26).H … Go to MESSAGE Reception/Transmission Details screen (See page 37).D… Go to MESSAGE EDITING screen (See page 40).M… Go to Frequency Display ScreenPress M over 1 second … Set mode (See page 45).ُٙٙ