Yaesu VX-120 Operating Manual

Also see for VX-120 Series: Brochure Specifications Technical supplement

VX-120 OPERATING MANUAL40Memory Bank ScanWhen the Memory Bank feature is engaged, the scanner sweeps only memory channels inthe current Memory Bank. However, if the Memory Bank Link Scan feature is enabled,you may sweep the memory channels in several Memory Banks which you have selected.To enable the Memory Bank Link Scan feature:1. Set the radio to the Memory mode by pressing the [MR(SKIP)] key, if necessary.2. Press and hold in the [VFO(PRI)] key for one second, then rotate the DIAL knob toselect the first Memory Bank (“BANK 1” ~ “BANK10”) you wish to sweep usingMemory Bank Link Scan.3. Press the [F] key momentarily. The current Memory Bank willnow be swept during Memory Bank Scan. A “decimal point”will be appended between the “N” and “K” of the Memory Banknumber indication (such as BAN.K 2).4. Repeat steps 2 and 3 above, to append the “decimal point” to any other Memory Banksyou wish to sweep.5. Now, press and hold in the [MR(SKIP)] key for one second to initiate the MemoryBank Link Scan.6. To remove a Memory Bank from the Memory Bank Link Scan, repeat steps 2 and 3above, to delete the “decimal point” from the Memory Bank number indication.SCANNINGMEMORY SCANNING