Yaesu VX-120 Operating Manual

Also see for VX-120 Series: Brochure Specifications Technical supplement

VX-120 OPERATING MANUAL80Set Mode Item 50 [VFO.SPL]Function: Enables or disables “VFO Split” operation.Available Values: VSP.OFF/VSP. ONDefault: VSP.OFFSet Mode Item 51 [WID.NAR]Function: Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.Available Values: WIDE/NARROWDefault: WIDENote: If “Narrow” is selected, the receiver audio level is increased slightly to compensatefor the reduced deviation. The receiver IF filter bandwidth is not changed via this setting.Set Mode Item 52 [WX ALT]Function: Enables/Disables the Weather Alert Scan feature.Available Values: ALT.OFF/ALT. ONDefault: ALT. OFFThe following Set Mode Items will appears when the optional FTD-7 DTMF Paging Unitis installed.Set Mode Item 53 [ANI]Function: Enables/Disables the ANI function.Available Values: ANI.OFF/ANI. ONDefault: ANI. OFFSet Mode Item 54 [ANI.WRT]Function: Program the ANI Identifier.See page 57 for details.Set Mode Item 55 [PAGER]Function: Enables/Disables the ANI function.Available Values: PAG.OFF/PAG. ONDefault: PAG. OFFSet Mode Item 56 [PAG.COD]Function: Setting the Pager Code for the DTMF Pager.See page 55 for details.Set Mode Item 57 [PAG.ABK]Function: Enables/Disables the Answer Back function of the DTMF Pager.Available Values: ABK.OFF/ABK. ONDefault: ABK. OFFSET (MENU) MODE