Yaesu VX-120 Operating Manual

Also see for VX-120 Series: Brochure Specifications Technical supplement

VX-120 OPERATING MANUAL56Activating the DTMF Pager1. Press the [F] key, then press the [LOW(LOCK)SET] key, to enter the Set mode.2. Rotate the DIAL knob to select Set Mode Item 55: PAGER.3. Press the [F] key momentarily to enable adjustment of this SetMode Item.4. Rotate the DIAL knob to select “ON.”5. Press the PTT switch to save the new setting and activate theDTMF Pager.When the DTMF Pager is activated, the “P” notation will re-place the “100 MHz” digit of the frequency display.6. Press the PTT switch to send the 3-digit DTMF pager code whichis stored in the last-selected DTMF Pager Memory register.7. When you receive a DTMF paging call, it will open your radio’sDTMF squelch, and the LCD will display the 3-digit DTMFpager code which was received. After five seconds, the DTMFpager will revert to its squelched mode.8. To disable the DTMF Pager, just repeat the above procedure, rotating the DIAL knobto select “OFF” in step 4 above.During DTMF Pager operation, you may set up the VX-120 such that a ringing “Bell”sound alerts you to the fact that a call is coming in, as described previously. See page 27 ofthe Operating Manual for details.DTMF PAGER OPERATION (REQUIRES OPTIONAL FTD-7)