Yaesu VX-120 Operating Manual

Also see for VX-120 Series: Brochure Specifications Technical supplement

VX-120 OPERATING MANUAL76Set Mode Item 27 [M/T-CL]Function: Selects the MONI key (just below the PTT switch) function.Available Values: MONI/T-CALLDefault: Depends on the transceiver version.MONI: Pressing the MONI key causes the Noise/Tone Squelch to be over-ridden, allow-ing you to listen for weak (or non-encoded) signals.T-CALL: Pressing the MONI key activates a 1750-Hz burst tone, used for repeater accessin many countries (especially in Europe).Set Mode Item 28 [NAME]Function: Toggles the display indication between “frequency” and the channel’s “Alpha/Numeric Tag.”Available Values: FREQ/ALPHADefault: FREQSet Mode Item 29 [NM WRT]Function: Stores Alpha-Numeric “Tags” for the Memory channels.See page 31 for details.Set Mode Item 30 [PSWD]Function: Enables/disables the Password feature.Available Values: PWD.OFF/PWD. ONDefault: PWD.OFFSet Mode Item 31 [PSWD W]Function: Stores the password.Available entries are W, L, R, U, F, M, V, and DSet Mode Item 32 [RESUME]Function: Selects the Scan Resume mode.Available Values: BUSY/HOLD/TIMEDefault: BUSYBUSY: The scanner will hold until the signal disappears, then will resume when the car-rier drops.HOLD: The scanner will stop when a signal is received, and will not restart.TIME: The scanner will hold for the five seconds, then resume whether or not the otherstation is still transmitting.SET (MENU) MODE