Yamaha 2007 FZ6-NA Service Manual

Contents

ENGINE3-14CAUTION:ECA4S81007• Engine oil also lubricates the clutch andthe wrong oil types or additives couldcause clutch slippage. Therefore, do notadd any chemical additives or use engineoils with a grade of CD “a” or higher anddo not use oils labeled “ENERGY CON-SERVING II” “b” or higher.• Do not allow foreign materials to enter thecrankcase.NOTE:Before checking the engine oil level, wait a fewminutes until the oil has settled.4. Start the engine, warm it up for severalminutes, and then turn it off.5. Check the engine oil level again.NOTE:Before checking the engine oil level, wait a fewminutes until the oil has settled.EAS20790CHANGING THE ENGINE OIL1. Start the engine, warm it up for severalminutes, and then turn it off.2. Place a container under the engine oil drainbolt.3. Remove:• Engine oil filler cap “1”• Engine oil drain bolt “2”(along with the gasket)4. Drain:• Engine oil(completely from the crankcase)5. If the oil filter cartridge is also to bereplaced, perform the following procedure.▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼a. Remove the oil filter cartridge “1” with an oilfilter wrench “2”.TypeSAE10W30, SAE10W40,SAE15W40, SAE20W40 orSAE20W50Recommended engine oil gradeAPI service SG type or higher,JASO standard MA