Yamaha 2007 FZ6-NA Service Manual

Contents

TIGHTENING TORQUES2-15EAS20320TIGHTENING TORQUESEAS20330GENERAL TIGHTENING TORQUE SPECIFI-CATIONSThis chart specifies tightening torques for stan-dard fasteners with a standard ISO threadpitch. Tightening torque specifications for spe-cial components or assemblies are providedfor each chapter of this manual. To avoidwarpage, tighten multi-fastener assemblies ina crisscross pattern and progressive stagesuntil the specified tightening torque is reached.Unless otherwise specified, tightening torquespecifications require clean, dry threads. Com-ponents should be at room temperature.A. Distance between flatsB. Outside thread diameterA (nut) B (bolt)General tighteningtorquesNm m·kg ft·lb10 mm 6 mm 6 0.6 4.312 mm 8 mm 15 1.5 1114 mm 10 mm 30 3.0 2217 mm 12 mm 55 5.5 4019 mm 14 mm 85 8.5 6122 mm 16 mm 130 13.0 94