Components21to provide more clearance when operating inshallow water.EMU30530Tilt lock mechanismThe tilt lock mechanism is used to preventthe outboard motor from lifting out of the wa-ter when in reverse gear.To lock it, set the tilt lock lever in the lock po-sition. To release, push the tilt lock lever inthe release position.EMU26332Tilt support barThe tilt support bar keeps the outboard motorin the tilted up position.NOTICEECM01660Do not use the tilt support bar whentrailering the boat. The outboard motorcould shake loose from the tilt supportand fall. If the motor cannot be trailered inthe normal running position, use an addi-tional support device to secure it in thetilt position.EMU26373Cowling lock lever(s) (turn type)To remove the engine top cowling, turn thecowling lock lever(s) and lift off the cowling.When installing the cowling, check to be sureit fits properly in the rubber seal. Then lockthe cowling again by returning the cowlinglock lever(s) to the lock position.1. Tilt lock leverZMU041111ZMU036951. Cowling lock lever(s)ZMU03699ZMU037011
