Components22EMU264102-pin connectorAC 12 V-40/60/80W power is deliveredthrough this connector. When using it, keepin mind the following points: Use a genuine Yamaha connector. Use lighting equipment only. Connect lighting equipment directly to the2-pin connector. Capacity of the lighting equipment must bemore than 12 V-40/60/80W; otherwise thebulb could burn out. When the connector is not in use, placethe cap on it.NOTICEECM01000Do not connect the 2-pin connector di-rectly to the battery terminals. Otherwisethe electric system will be damaged.EMU26420Battery charging informationIf you need to charge the battery, use a gen-uine charge cable to make the charging cir-cuit.For details on the cable connections, consultyour Yamaha dealer.TIP: Do not use the 2-pin connector whilecharging. The battery will not be charged. If you need to use lighting equipment whilecharging the battery, connect it to the bat-tery, not to the 2-pin connector.EMU26303Alert indicatorIf the engine develops a condition which iscause for alert, the indicator lights up. Fordetails on how to read the alert indicator, seepage 23.ZMU037031. Alert indicatorZMU037041
