Trouble Recovery703. Remove the starter/flywheel cover afterremoving the bolt(s).4. Prepare the engine for starting. For fur-ther information, see page 35. Be surethe engine is in neutral and that the clipis attached to the engine shut-off switch.The main switch must be “ ” (on), ifequipped.5. If equipped the choke knob, pull out itwhen the engine is cold. After the enginestarts, gradually return the choke knobto its home position as the engine warmsup.6. Insert the knotted end of the emergencystarter rope into the notch in the flywheelrotor and wind the rope several turnsaround the flywheel clockwise.7. Give a strong pull straight out to crank1. Start-in-gear protection cableZMU037401ZMU03741ZMU03742ZMU02334ON STARTOFFZMU01906ZMU03743
