Operation43pact the steering wheel or other parts ofthe boat. This could increase the risk ofserious injury. It could also damage theshift mechanism. Do not shift into reverse while travelingat planing speeds. Loss of control, boatswamping, or damage to the boat couldoccur.The boat is not equipped with a separatebraking system. Water resistance stops it af-ter the throttle lever is moved back to idle.The stopping distance varies depending ongross weight, water surface conditions, andwind direction.EMU27821Stopping engineBefore stopping the engine, first let it cool offfor a few minutes at idle or low speed. Stop-ping the engine immediately after operatingat high speed is not recommended.EMU27845Procedure1. Push and hold the engine stop button orturn the main switch to “ ” (off).2. After stopping the engine, disconnectthe fuel line if there is a fuel joint on theoutboard motor.3. Tighten the air vent screw on the fueltank cap (if equipped).4. Remove the key if the boat will be leftunattended.TIP:The engine can also be stopped by pullingthe cord and removing the clip from the en-ZMU03690ZMU03725ZMU02041
