POWR Power unit5-59 69J1D11CAUTION:Before installing the oil pump, be sure tofill it with engine oil through the oil pas-sage k.16. Install the baffle plate G to the specifiedtorque.17. Install the new gasket and crankcasecover, and then tighten the bolts to thespecified torque in two stages and in thesequence shown.18. Install the new gasket and cooling waterpassage cover, and then tighten the boltsto the specified torque in the sequenceshown.19. Before installing the power unit, be sureto fill it with engine oil through the oil pas-sage l of the oil filter bracket.NOTE:Apply a thin coat of engine oil to the O-ring ofthe new oil filter before installation.T R..Baffle plate nut:12 N·m (1.2 kgf·m, 8.7 ft·lb)T R..Crankcase cover bolt:1st: 14 N·m (1.4 kgf·m, 10 ft·lb)2nd: 28 N·m (2.8 kgf·m, 20 ft·lb)T R..Cooling water passage cover bolt:12 N·m (1.2 kgf·m, 8.7 ft·lb)
