SPEC Specifications2-3 69J1D11Maintenance specifications 2Power unitItem Unit ModelF200TR LF200TR F225TR LF225TRPower unitMinimum compressionpressure(*1)kPa(kgf/cm2 , psi)880 (8.8, 125)Lubrication oil pressure(*2) kPa (kgf/cm2 ,psi) at700 r/min650 (6.5, 924)Cylinder headsWarpage limit mm (in) 0.1 (0.004)(lines indicate straightedgeposition)Camshaft cap inside diameter mm (in) 25.00–25.02 (0.9843–0.9850)CylindersBore size mm (in) 94.00–94.02 (3.7008–3.7016)Taper limit mm (in) 0.08 (0.0032)Out-of-round limit mm (in) 0.05 (0.0020)PistonsPiston diameter (D) mm (in) 93.921–93.941 (3.6977–3.6985)Measuring point (H) mm (in) 5 (0.2)Piston-to-cylinder clearance mm (in) 0.075–0.080 (0.0029–0.0031)Piston pin boss bore mm (in) 21.02–21.03 (0.8276–0.8280)Piston pinsOutside diameter mm (in) 21.00 (0.827)Piston ringsTop ringDimension B mm (in) 1.17–1.19 (0.0461–0.0468)Dimension T mm (in) 2.8–3.0 (0.110–0.118)End gap mm (in) 0.15–0.30 (0.0059–0.0118)Side clearance mm (in) 0.04–0.08 (0.0016–0.0031)(*1) Measure conditions:Ambient temperature 20 °C (68 °F), wide open throttle, with spark plugs removed from all cylinders.The figures are for reference only.(*2) The figures are for reference only.
