TRBLSHTG Troubleshooting9-3 69J1D11Hardware requirementsMake sure that your computer meets the following requirements before using this software.Computer: IBM-compatible computerOperating system: Microsoft (Windows 95,) Windows 98, Windows Me, Windows 2000, orWindows XP (English version)CPU:Windows 95/98: i486X, 100 MHz or higher (Pentium 100 MHz or higher recommended)Windows Me/2000: Pentium, 166 MHz or higher (Pentium 233 MHz or higher recommended)Windows XP: Pentium, 300 MHz or higher (Pentium 500 MHz or higher recommended)Memory:Windows 95/98: 16 MB or more (32 MB or more recommended)Windows Me: 32 MB or more (64 MB or more recommended)Windows 2000: 64 MB or more (128 MB or more recommended)Windows XP: 128 MB or more (256 MB or more recommended)Hard disk free space: 20 MB or more (40 MB or more recommended)Drive: CD-ROM driveDisplay: VGA (640 × 480 pixels), (SVGA [800 × 600 pixels] or more recommended)256 or more colorsMouse: Compatible with the operating systems mentioned aboveCommunication port: RS232C (Dsub-9 pin) port, USB portPrinter: Compatible with the operating systems mentioned aboveNOTE:• The amount of memory and the amount of free space on the hard disk differs depending on thecomputer.• Using this software while there is not enough free space on the hard disk could cause errors andresult in insufficient memory.• This software will not run properly on some computers.• When starting up this program, do not start other software applications.• Do not use the screen saver function or the energy saving feature when using this program.• If the ECM is changed, restart the program.• Window XP is a multiuser operating system, therefore, be sure to end this program if the loginuser is changed.• The USB adapter cannot be used with Windows 95.For operating instructions of the Yamaha Diagnostic System, refer to the “Yamaha Diagnostic Sys-tem Instruction Manual.”
