Components36EMU26246Trim tab with anodeWARNINGEWM00841An improperly adjusted trim tab couldcause difficult steering. Always test runafter the trim tab has been installed or re-placed to be sure steering is correct. Besure you have tightened the bolt after ad-justing the trim tab.The trim tab should be adjusted so that thesteering control can be turned to either theright or left by applying the same amount offorce.If the boat tends to veer to the left (port side),turn the trim tab rear end to the port side “A”in the figure. If the boat tends to veer to theright (starboard side), turn the trim tab end tothe starboard side “B” in the figure.NOTICEECM00841The trim tab also serves as an anode toprotect the engine from electrochemicalcorrosion. Never paint the trim tab as itwill become ineffective as an anode.EMU26342Tilt support lever for power trim andtilt modelTo keep the outboard motor in the tilted upposition, lock the tilt support lever to theclamp bracket.1. Trim tab2. Bolt3. Cap321ZMU07152Bolt tightening torque:42 Nm (4.28 kgf-m, 31 ft-lb)1. Tilt support leverAB ZMU01863ZMU072061©2017 Yamaha Motor Corporation, U.S.A.
