Operation592. Check that the rubber seal is seated allthe way around the bottom cowling.3. Check that all of the cowling lock leversare pulled outward.4. Align the 3 protrusions on the top cowl-ing with the corresponding holders onthe bottom cowling, and then place thetop cowling on the bottom cowling.5. Push the cowling lock levers inward tosecure the top cowling.6. Check the fitting of the top cowling bypushing it with both hands. NOTICE: Ifthe top cowling is not installed cor-rectly, water can enter the top cowl-ing and damage the engine, or the topcowling can blow off at high speeds.[ECM02371]1. Top cowling2. Protrusion3. Holder4. Bottom cowling1. Top cowling2. Protrusion3. Holder4. Bottom cowling2341ZMU070152143 2 3ZMU070161. Cowling lock lever1. Cowling lock lever(s)1ZMU069201 ZMU06921ZMU07160©2017 Yamaha Motor Corporation, U.S.A.
