Maintenance87mark, drain until the level meets thespecified capacity. [ECM01851]12. Install the oil filler cap.13. Leave the outboard motor for 5-10 min-utes.14. Remove the oil dipstick and wipe itclean.15. Insert the dipstick and remove it again.Be sure to completely insert the dipstickinto the dipstick guide, otherwise the oillevel measurement will be incorrect.16. Recheck the oil level using the dipstickto be sure the level falls between the up-per and lower marks. Consult yourYamaha dealer if the oil level is out ofspecified level.17. Start the engine and make sure that thelow oil pressure-alert indicator remainsoff. Also, make sure that there are no oilleaks. NOTICE: If the low oil pressure-alert indicator comes on or if thereare oil leaks, stop the engine and findthe cause. Continued operation witha problem could cause severe enginedamage. Consult your Yamaha dealerif the problem cannot be located andcorrected. [ECM01623]18. Install the apron on the starboard side asshown in the illustration.Recommended engine oil:YAMALUBE 4M FC-W or 4-stroke out-board motor oilEngine oil quantity (without oil filterreplacement):6.0 L (6.34 US qt, 5.28 Imp.qt)Engine oil quantity (with oil filter re-placement):6.3 L (6.66 US qt, 5.54 Imp.qt)1. Oil dipstickZMU070201ZMU071571. Oil dipstick2. Upper mark3. Lower mark1 23ZMU06918©2017 Yamaha Motor Corporation, U.S.A.
