Yamaha FZ6-SS 2004 Service Manual

Contents

8-6CHECKING THE BULBS AND BULB SOCKETS ELECCAUTION:NOTE: Be sure to hold the socket firmly when re-moving the bulb. Never pull the lead, other-wise it may be pulled out of the terminal inthe coupler. Avoid touching the glass part of the head-light bulb to keep it free from oil, otherwisethe transparency of the glass, the life of thebulb, and the luminous flux will be adverse-ly affected. If the headlight bulb gets soiled,thoroughly clean it with a cloth moistenedwith alcohol or lacquer thinner.2. Check: bulb (for continuity)(with the pocket tester)No continuity Replace.Pocket tester90890-03112, YU-3112Before checking for continuity, set the pockettester to “0” and to the “Ω 1” range.a. Connect the positive tester probe to terminal1 and the negative tester probe to terminal2 , and check the continuity.b. Connect the positive tester probe to terminal1 and the negative tester probe to terminal3 , and check the continuity.c. If either of the readings indicate no continuity,replace the bulb.CHECKING THE CONDITION OF THE BULBSOCKETSThe following procedure applies to all of the bulbsockets.1. Check: bulb socket (for continuity)(with the pocket tester)No continuity Replace.