Yamaha FZ6-SS 2004 Service Manual

Contents

3-13ADJUSTING THE VALVE CLEARANCE CHKADJNOTE:NOTE:c. Round off the original valve pad number ac-cording to the following table.Last digit Rounded value0 or 2 05 58 10EXAMPLE:Original valve pad number= 148 (thickness =1.48 mm (0.058 in))Rounded value = 150d. Locate the rounded number of the originalvalve pad and the measured valve clearancein the valve pad selection table. The pointwhere the column and row intersect is thenew valve pad number.The new valve pad number is only an approxi-mation. The valve clearance must be measuredagain and the above steps should be repeated ifthe measurement is still incorrect.e. Install the new valve pad 1 and the valve lift-er 2 . Lubricate the valve pad with molybdenum dis-ulfide grease. Lubricate the valve lifter with molybdenum dis-ulfide oil. Install the valve lifter and the valve pad in thecorrect place. The valve lifter must turn smoothly when ro-tated by hand.f. Install the exhaust and intake camshafts,timing chain and camshaft caps.Camshaft cap bolt10 Nm (1.0 mkg, 7.2 ftlb)