8-26CHARGING SYSTEM ELECYES NO5. Stator coil resistance Remove the generator cover. Connect the pocket tester (Ω 1) to the sta-tor coils as shown.Replace the statorcoil assembly.EAS00776Positive tester probe whiteNegative tester probe whitePositive tester probe whiteNegative tester probe white1123 Measure the stator coil resistances.Stator coil resistance0.22 0.34 Ω at 20C (68F) Is the stator coil OK?YES NO6. Wiring Check the wiring connections of the entirecharging system.Refer to “CIRCUIT DIAGRAM”. Is the charging system’s wiring properly con-nected and without defects?Properly connect orrepair the chargingsystem’s wiring.EAS00779Replace the rectifi-er/regulator.4. Stator coil lead Disconnect stator coil lead coupler. Connect the pocket tester (Ω 1) to the sta-tor coil lead coupler as shown.Positive tester probe whiteNegative tester probe ground3Positive tester probe whiteNegative tester probe ground1Positive tester probe whiteNegative tester probe groundNocontinuity2YES NOReplace the statorcoil lead. Are the tester readings correct?