3 - 42CHKADJBLEEDING THE HYDRAULIC BRAKE SYSTEM/ADJUSTING THE SELECT LEVER CONTROL CABLE AND SHIFT RODk.Add brake fluid to the proper level.Refer to “CHECKING THE BRAKE FLUIDLEVEL”.WARNINGCheck the operation of the brake afterbleeding the brake system.*****************************************************ADJUSTING THE SELECT LEVERCONTROL CABLE AND SHIFT ROD1 NEUTRAL2 HIGH3 LOW4 REVERSE5 PARK6 Control cable7 Select lever shift rodWARNINGBefore moving the select lever, bring themachine to a complete stop and return thethrottle lever to its closed position.Otherwise the transmission may bedamaged.1.Adjust: Rear brake pedal free playRefer to “ADJUSTING THE REAR BRAKE”.2.Adjust: Select lever control cable Select lever shift rod*****************************************************Adjustment steps:Control cable: Make sure the select lever is in NEUTRAL. Adjust the control cable so there is zero freeplay in the cable. When the adjustment iscorrect, slack in the return spring 1 will betaken up.NOTE:In some cases it will be necessary to furtheradjust the cable with the locknuts 2arrangement that holds the cable to its mount.
