4 - 48ENGPRIMARY AND SECONDARY SHEAVESASSEMBLING THE PRIMARY SHEAVE1.Clean: Primary sliding sheave face 1 Primary fixed sheave face 2 Collar 3 Weight 4 Primary pulley cam faceNOTE:Remove any excess grease.2.Install: Weight 1NOTE: Apply Yamaha Grizzly grease (120 g) to thewhole outer surface of the weight and install. Apply Yamaha Grizzly grease to the innersurface of the collar. Apply Yamaha Grizzly grease to the innersurface of the primary sliding sheave.3.Install: Spacer Slider 1 Primary pulley cam 2 Primary sliding sheave capT R..3 Nm (0.3 m • kg, 2.2 ft • lb)ASSEMBLING THE SECONDARY SHEAVE1.Apply: BEL-RAY assembly lube®(to the secondary sliding sheave 1 innersurface and oil seals) BEL-RAY assembly lube®(to the bearings, oil seals and inner surfaceof the secondary fixed sheave 2)2.Install: Guide pin 1
