3 - 52CHKADJCHECKING THE TIRE1.Measure: Tire pressure (cold tire pressure)Out of specification → Adjust.NOTE: The low-pressure tire gauge 1 is includedas standard equipment. If dust or the like is stuck to this gauge, it willnot provide the correct readings. Therefore,take two measurements of the tire’s pressureand use the second reading.WARNINGUneven or improper tire pressure mayadversely affect the handling of thismachine and may cause loss of control. Maintain proper tire pressures. Set tire pressures when the tires are cold. Tire pressures must be equal in both fronttires and equal in both rear tires.2.Check: Tire surfacesWear/damage → Replace.WARNINGIt is dangerous to ride with a worn-out tire.When tire wear is out of specification,replace the tire immediately.Cold tirepressure Front RearStandard25 kPa(0.25 kg/cm2,3.6 psi)25 kPa(0.25 kg/cm2,3.6 psi)Minimum22 kPa(0.22 kg/cm2,3.2 psi)22 kPa(0.22 kg/cm2,3.2 psi)Maximum28 kPa(0.28 kg/cm2,4.0 psi)28 kPa(0.28 kg/cm2,4.0 psi)Tire wear limit a:Front and rear: 3.0 mm (0.12 in)
